PHYSICAL CHARACTERISTICS

Dimensions

0.46 in. H x 0.85 in. W x 0.61 in. D
11.75 mm H x 21.6 mm W x 15.5 mm D

Weight

0.27 oz./7.6 g

Configuration

Decoded (EM1350)

Interface

EM1350:
SSI Control over TTL Serial on a 12-pin ZIF connector

USER ENVIRONMENT

Ambient Lighting Tolerance

Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED⁵ : 450 Ft Candles (4,844 Lux) Sunlight: 8000 Ft Candles (86,111 Lux)

Operating Temperature

-22° F to 140° F/ -30° C to 60° C

Storage Temperature

-40° F to 158° F/-40° C to 70° C

Humidity

95% RH, non-condensing

Shock Rating

2000 G

Power

EM1350:
Input Voltage: 3.3 VDC ±0.3 VDC
Input Current: 78 mA typical
Standby Current: 25 μA typical
Vcc Noise Level: 100 mV peak to peak max

Laser Power (at 650 nm)

Scanning mode: 1.7mW (nominal peak power)
Aiming mode: 0.67 mW

PERFORMANCE CHARACTERISTICS

Scan Angle

Wide (default): 47° (typical)
Medium: 35° (typical)
Narrow: 10° (typical)

Note: The SE96X scan engine does not require margin on either side of the bar code to decode. The 47° scan line provides identical scanning performance to older scan engines with a scan line of 53°.

Skew Tolerance

±40° from normal

Pitch Tolerance

±65° from normal

Roll Tolerance

±35° from vertical

Specular Dead Zone

±8°

Optical Resolution

0.005 in. minimum element width

Scan Repetition Rate

104 (± 12) scans/sec (bidirectional)

Print Contrast

Minimum 25% absolute dark/light reflectance measured at 650 nm

REGULATORY

Laser Classification

Intended for use in CDRH Class II/IEC
Class 2 devices

Electrical Safety

UL 60950-1; EN/IEC 60950-1; EN/IEC 60825-1

EMI/RFI

EMI- FCC Part 15 Class B, ICES-003 Class B, CISPR Class B, Japan VCCI Class B

Environmental

RoHS Compliant